Electrónica Olfer Home | Company | Produts | What's new? | Articles | Contact  
Electronic Components Distributor
Fuentes de alimentación
Power Supplies
PRODUCTS
 
 
Search for
Power Supplies / Converters

1.2)Open Type - Four outputs
           
Go to power 100-200W
 
Four outputs (100 W -200 W) UP
Series

Power see data sheet

Output voltage Regulations CE ROHS Normal Stock
Image
Dimensions
L*W*H(mm)
PQ-100
100 W

5, 12, -5 and -12;
5, 15, -5 and -15; 5, 12, 24 and -12; 5, 12, 15 and 24

Certifications

OK OK NO
PQ-100
177.8*107.95*46
Functions/Notes This series will be replaced by MPQ-120
PPQ-100

100 W

3.3, 5, 12 and -5;
3.3, 5, 12 and -12;
3.3, 5, 15 and -15;
3.3, 5, 12 and 24; 5, 12, -5 and -12; 5, 15, -5 and -15; 5, 12, 24 and -12

Certifications

OK OK OK PPQ-100
177.8*107.95*38
Functions/Notes PFC
MPQ-120
120 W

5, 12, -5 and -12;
5, 15, -5 and -15; 5, 12, 24 and -12; 5, 12, 15 and 24

Certifications

OK OK NO
MPQ-120
177.8x107.95x35.5
Functions/Notes Medical and industrial.
MPQ-200

200 W

5, 12, -5 and -12;
5, 15, -5 and -15; 5, 12, 24 and -12; 5, 15, 24 and -15

Certifications

OK OK NO
MPD-200
177.8x107.2x35.5
Functions/Notes PFC Medical and industrial.

Information: check the PDF for each model to determine the real output power, temperature range, parallel use possibilities, or any other important detail. If you have any doubts, contact us

Important:Most multiple output power supplies require a minimum load to function as per the specifications. If the minimum specified load is not used then the output voltages may suffer fluctuations greater than those specified, or the device may not switch on. If you have any doubts, contact us

Models with several outputs indicate a current range (amps) for each output. Nevertheless, we may never exceed the maximum power for the device. For example, the D-60A model has two outputs: 5 and 12 VDC. The 5Vdc output indicates a range of 0.3 (minimum load) to 6 amps, and the output of 12VDC from 0.2 to 4 amps. If we calculate the maximum power per output:

5VDC 6 amps = 30 W and 12VDC to 4 amps = 48 W
This calculation could lead to incorrect conclusions as it assumes that we may receive the maximum power from both outputs at the same time.The sum of the maximum power from both outputs is 78W, but the maximum power output for this model is 56W, thus forcing us to share the load as required (complying with the minimum load requirements) without exceeding the maximum power output (56 W).

You will need Adobe Acrobat Reader to view the files.

[Back]

[Power supplies and converters home] [Search for power supplies and converters]
[Mean Well power supplies and converters] [Puls power supplies and converters]
[Inverters]

 

P. Ind. Casablanca II. Avda. Severo Ochoa, 37 28100 Alcobendas - MADRID
Telf: +34 914840850 info@olfer.com
C/ Fabra i Puig 480, local 4. 08042 BARCELONA
Telf: +34 932749082 bcnolfer@olfer.com