We are proud to present the new series of ML100.200 power supplies. This an economic model for converting alternating voltage of a tri-phasic installation into regulated DC current. It only requires two phases and a such saves us space, wiring, fuses and installation time.

The ML100.200 is very compact, highly efficient and easy to use. Inputs are electronically protected so that external fuses need not always be used. If we compare its weight of 360 grammes with control transformers (normally used to provide low voltages where no neutral area exists) the advantages are clear (saving of space, time, increased reliability, greater efficiency, etc.).

Given their high immunity to input peaks and their very low electromagnetic emissions they can be used in practically any place.

PULS has designed a new power source to supercede the few applications which still use transformers. offering improved performance at an economic price.

The following characteristics are worth noting:

- AC two-phase power supply from 323 Vca to 552 Vca without need for neutral.
- Input fuse included.
- High efficiency up to 90%.
-Working temperature without loss of power from -10ºC to +60ºC.
- Low start-up peak.
-Rapid connection with the bi-stable spring clamp, screwless, patented system.
- 2 year warrantee.

	ML 100.200
Output Voltage	24 Vcc	Modifiable from 24 to 28 Vcc
Nominal output intensity	4.2 Amperes at 24 Vcc	3.6 Amperes at 28 Vcc
Power	100 W
Noise and ripple	< 70 mVpp	From 20 Hz to 20MHz
Input Voltage	380-480 Vac 2 phases	+/- 15%
Input frequency	50-60 Hz	+/-6%
AC input intensity	0.6 / 0.5 Amperes	at 400 and 480 Vac respectively
Power factor	0,5
AC start-up peak	< 15 Amperes
Hold up Time	20 / 30 ms	at 400/480 Vca
Efficiency	0,9
Losses	11 W
Operating temperature	From -10 to +70ºC
Humidity	<95% relative humidity without condensation
Vibrations	2G	IEC 60068-2-6 compliant
Dimensions:	72.5 x 75 x 103 mm.	Width x Height x Length

Do not hesitate to contact our sales department to consult prices and availability.

Back